Grundfos CMBE TWIN, Инструкция по установке и эксплуатации

Страница: 22 / 38

WARNING
Electric shock
Death or serious personal injury
‐
If the operating panel is cracked or perforated, replace it immediately. Contact the nearest Grundfos sales company.
You can set the product by means of the following user interfaces:
•
Operating panel on the product
• Grundfos GO Remote.
If the power supply is switched off, the settings will be stored.
8.1 Setting by means of the operating panel
8.1.1 Standard operating panel
Stop
1
2
3
4
5
TM054848
Pos. Symbol Description
1 Grundfos Eye: The indicator light shows the operating status of the product.
2 - Light fields for indication of the setpoint.
3 Up / Down : The buttons change the setpoint.
4
Radio communication : The button enables radio communication with Grundfos GO Remote and other products of the
same type.
5
Start/Stop : Press the button to make the product ready for operation or to start and stop the product. Start : If you press the
button when the product is stopped, the product starts if no other functions with higher priority have been enabled. Stop : If
you press the button when the product is running, the product always stops. When you press the button, the stop icon
appears at the bottom of the display.
8.1.2 Starting and stopping the booster system
1. Start each pump by pressing the Start/Stop button or by continuously pressing the Up button until the desired setpoint is indicated.
Start/Stop : If you press the button when the product is stopped, the product starts if no other functions with higher priority have been
enabled.
2. Stop each pump by using one of the following methods:
• Press the
Start/Stop button.
• Continuously press the Down button until none of the light fields are on.
• Use Grundfos GO Remote.
• Use the digital input if you have set it to
External stop . Be aware of the priority of settings.
When the pump is stopped, the "Stop" text next to the button will be illuminated.
If you stop the pump by pressing the
Start/Stop button, you must press the Start/Stop button to start the pump.
If you stop the pump by pressing the Down button, you must press the Up button to start the pump.
Related information
8.3 Priority of settings
8.1.3 Setting the pressure of the booster system
The booster system will maintain a certain pressure in the system.
22
English (GB)