Grundfos CMBE TWIN, Инструкция по установке и эксплуатации

Страница: 24 / 38

• Grundfos MI 204
• Grundfos MI 301.
+
+
1
2
TM066256
Pos. Description
1
Grundfos MI 204:
Add-on module enabling radio or infrared communication. Use MI 204 together with an Apple iPhone or iPod with lightning connector,
such as fifth generation or later iPhone or iPod.
MI 204 is also available together with an Apple iPod touch and a cover.
2
Grundfos MI 301:
Separate module enabling radio or infrared communication. Use the module together with an Android or iOS-based smart device with
Bluetooth connection.
8.2.2 Communication
When Grundfos GO Remote initiates communication with the product, the indicator light in the centre of Grundfos Eye flashes green.
On products fitted with an advanced operating panel, the display indicates that a wireless device is trying to connect to the product.
Press
OK on the operating panel to connect the product with Grundfos GO Remote, or press the Home button to reject connection.
Symbol Description
Press OK on the operating panel to connect the product with
Grundfos GO Remote.
Setpoint
5.00 bar
Operaring mode
Normal
Actual controlled value
4.90 bar
Control mode
Const. pressure
Status Settings Assist
1 2 3
5 6 7 8 9
Press the Home button to reject connection.
You can choose between these communication types:
•
radio communication
• infrared communication.
8.2.3 Radio communication
Radio communication can take place at distances up to 30 metres. The first time Grundfos GO Remote communicates with the product, you
enable communication by pressing the
Radio communication button or OK on the operating panel.
Later when communication takes place, the product is recognised by Grundfos GO Remote, and you can select the product from
the
List menu.
8.2.4 Infrared communication
Infrared communication can take place at distances up to 2 m.
When communicating via infrared light, Grundfos GO Remote must be pointed at the operating panel of the product.
8.3 Priority of settings
With Grundfos GO Remote, you can set the motor to operate at maximum speed or to stop.
If two or more functions are enabled at the same time, the motor operates according to the function with the highest priority.
If you have set the motor to maximum speed via the digital input, the motor operating panel or Grundfos GO Remote can only set the motor
to
Manual or Stop .
The priority of the settings appears from the table below:
24
English (GB)