Grundfos BACnet IP, Функциональный профиль и руководство пользователя

Страница: 4 / 35

English (GB) Installation and operating instructions
Original installation and operating instructions
Table of contents
1. General information . . . . . . . . . . . . . . . . . . . . . . . . 4
1.1 Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.2 Target group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.3 Definitions and abbreviations . . . . . . . . . . . . . . . . . . . 5
1.4 BACnet bus topology . . . . . . . . . . . . . . . . . . . . . . . . 5
2. Important information before setting up the system . . . 6
2.1 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.2 Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.3 Device Object Instance Number. . . . . . . . . . . . . . . . . . 7
2.4 Terminal connections overview . . . . . . . . . . . . . . . . . . 8
3. Connecting fieldbus to MIXIT . . . . . . . . . . . . . . . . . . 9
3.1 Configuring BACnet MS/TP . . . . . . . . . . . . . . . . . . . . 9
3.2 Configuring BACnet IP . . . . . . . . . . . . . . . . . . . . . . . 9
4. Setting the application type . . . . . . . . . . . . . . . . . . 10
5. Controlling the valve manually . . . . . . . . . . . . . . . . 10
6. Setting the temperature setpoint . . . . . . . . . . . . . . . 10
7. Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
7.1 Functions overview . . . . . . . . . . . . . . . . . . . . . . . . 12
7.2 Temperature controller . . . . . . . . . . . . . . . . . . . . . . 13
7.3 Underfloor overheat protection . . . . . . . . . . . . . . . . . 13
7.4 Coil preheat and frost protection . . . . . . . . . . . . . . . . 14
7.5 Pump control modes. . . . . . . . . . . . . . . . . . . . . . . . 15
7.6 Outdoor temperature compensation . . . . . . . . . . . . . . 17
7.7 Eco schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
7.8 Warm-weather shutdown . . . . . . . . . . . . . . . . . . . . . 19
7.9 Pressure independence. . . . . . . . . . . . . . . . . . . . . . 19
7.10 Limiters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
7.11 Energy monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
8. Configuring inputs in Grundfos GO Remote . . . . . . . 21
8.1 Configuring an outdoor temperature sensor input and
outdoor temperature compensation. . . . . . . . . . . . . . . 21
8.2 Configuring a setpoint from analog input . . . . . . . . . . . 21
9. Fault finding the product . . . . . . . . . . . . . . . . . . . . 22
9.1 The external control icon is not switched on . . . . . . . . . 22
9.2 Data is read from the MIXIT unit but it is not reacting on
a setpoint change . . . . . . . . . . . . . . . . . . . . . . . . . 22
9.3 The controlled temperature is much different than the
requested temperature for more than 10-20 minutes . . . . 22
9.4 The MIXIT unit was put into bus control, but it is now in
local control again . . . . . . . . . . . . . . . . . . . . . . . . . 22
9.5 The MIXIT unit was stopped from BACnet command,
but it has started again . . . . . . . . . . . . . . . . . . . . . . 22
9.6 The MIXIT unit does not start the pump when a start
signal is given in BO,1. . . . . . . . . . . . . . . . . . . . . . . 22
9.7 The MIXIT unit does not stop the pump when a stop
signal is given in BO,1. . . . . . . . . . . . . . . . . . . . . . . 22
9.8 Reading and resetting warnings and alarms . . . . . . . . . 23
10. Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
10.1 BACnet device object . . . . . . . . . . . . . . . . . . . . . . . 24
10.2 Functions for configuration and control . . . . . . . . . . . . 25
10.3 Simulation functions . . . . . . . . . . . . . . . . . . . . . . . . 28
10.4 System monitoring . . . . . . . . . . . . . . . . . . . . . . . . . 28
11. BACnet telegrams . . . . . . . . . . . . . . . . . . . . . . . . 32
11.1 BACnet MS/TP telegram overview . . . . . . . . . . . . . . . 32
12. Supported services . . . . . . . . . . . . . . . . . . . . . . . 32
12.1 Data-sharing services . . . . . . . . . . . . . . . . . . . . . . . 32
12.2 Device management services . . . . . . . . . . . . . . . . . . 33
1. General information
This functional profile describes Grundfos BACnet MIXIT.
Read this document before you install the product.
Installation and operation must comply with local
regulations and accepted codes of good practice.
1.1 Notes
The symbols and notes below may appear in Grundfos installation
and operating instructions, safety instructions and service
instructions.
Observe these instructions for explosion-proof products.
A blue or grey circle with a white graphical symbol
indicates that an action must be taken.
A red or grey circle with a diagonal bar, possibly with a
black graphical symbol, indicates that an action must not
be taken or must be stopped.
If these instructions are not observed, it may result in
malfunction or damage to the equipment.
Tips and advice that make the work easier.
1.2 Target group
This functional profile assumes that the reader is familiar with the
startup and programming of BACnet devices. The reader is required
to have basic knowledge of BACnet protocol and technical
specifications. It is also assumed that an existing BACnet MS/TP or
BACnet IP network is present.
4
English (GB)