Grundfos AQC-D5, Инструкция по установке и эксплуатации

Страница: 4 / 52

English (GB)
4
English (GB)
Installation and operating instructions
Original installation and operating instructions
CONTENTS
Page
1. Symbols used in this document
2. Identification
2.1 Nameplate
Fig. 1
Nameplate, AQC-D5 preassembled system
1. Symbols used in this document 4
2. Identification 4
2.1 Nameplate 4
2.2 Type key, AQC-D5 preassembled system
5
3. General information 6
4. Safety 6
4.1 Obligations of the owner/operations manager
6
4.2 Avoidance of danger 6
5. Function and applications 6
5.1 Functional principle of measurement 7
6. Technical data 7
6.1 Used chemicals 7
6.2 Dimensional sketch / drilling diagram 7
7. Device description 8
8. Installation 9
8.1 Transport and storage 9
8.2 Unpacking 9
8.3 Installation requirements 9
8.4 Mounting 9
9. Commissioning
9
9.1 Water connections
9
9.2 Installation of electrodes 9
9.3 Checking magnetic stirring stone and filling in cleaning
ball
10
9.4 Screwing in potentiostatic electrode 10
9.5 Installation of temperature sensor Pt100 11
9.6 Installation of the sample water deficiency sensor
11
9.7 Electrical connections 11
9.8 Checks prior to start-up 11
9.9 Operating the Conex® DIA
11
9.10 Commissioning of the measuring cell 12
10. Calibration 12
10.1 Photometrical measurement
12
10.2 Calibration 12
11. Operation 13
11.1 Switching on 13
11.2 After start-up
13
11.3 Adjusting the sample water flow 13
11.4 Switching off 13
12. Fault finding 14
13. Maintenance 15
13.1 Intervals for cleaning and maintenance 15
13.2 Exchanging the tube of the peristaltic pump
15
13.3 Cleaning the filter 15
13.4 Cleaning measuring cell AQC-D5 15
14. Accessories
17
14.1 Included accessories
17
14.2 Spare parts 17
15. Wiring diagram
18
16. Disposal 18
Warning
These complete installation and operating
instructions are also available on www.grundfos.com.
Prior to installation, read these installation and
operating instructions. Installation and operation
must comply with local regulations and accepted
codes of good practice.
Warning
If these safety instructions are not observed, it may
result in personal injury!
Caution
If these safety instructions are not observed, it may
result in malfunction or damage to the equipment!
Note
Notes or instructions that make the job easier and
ensure safe operation.
TM0
4
130
4
2
5
0
9
Pos. Description
1 Type designation
2 Model
3 Product name
4 Voltage [V]
5 Frequency [Hz]
6 Product number
7 Country of origin
8 Year and week of production
9 Marks of approval, CE mark, etc.
10 Power consumption [VA]
11 Enclosure class
12 Serial number
DIA-1-A D5-AU-X-QS-T, W-G
314-350-10002
S/N: 10/06187
Conex DIA-1 preassembled
230/240V 50/60Hz, 32 VA, IP 65
95700900P1109251006187
1
2
3
4
5
7 8 9
10
11
12
6