Grundfos ALPHA2 15-55F CI 115V, Инструкция по установке и эксплуатации

Страница: 3 / 22

3
English (US)
be sent freight prepaid; documentation
supporting the warranty claim and/or a Return
Material Authorization must be included if so
instructed.
Grundfos will not be liable for any incidental or
consequential damages, losses, or expenses
arising from installation, use, or any other
causes. There are no express or implied
warranties, including merchantability or fitness
for a particular purpose, which extend beyond
those warranties described or referred to above.
Some jurisdictions do not allow the exclusion or
limitation of incidental or consequential
damages and some jurisdictions do not allow
limitations on how long implied warranties may
last. Therefore, the above limitations or
exclusions may not apply to you. This warranty
gives you specific legal rights and you may also
have other rights which vary from jurisdiction to
jurisdiction.
Products which are repaired or replaced by
Grundfos or authorized service center under the
provisions of these limited warranty terms will
continue to be covered by Grundfos warranty
only through the remainder of the original
warranty period set forth by the original
purchase date.
2. General information
2.1 Symbols used in this document
The text accompanying the three hazard
symbols DANGER, WARNING and CAUTION
will be structured in the following way:
Example
DANGER
Indicates a hazardous situation which,
if not avoided, will result in death or
serious personal injury.
WARNING
Indicates a hazardous situation which,
if not avoided, could result in death or
serious personal injury.
CAUTION
Indicates a hazardous situation which,
if not avoided, could result in minor or
moderate personal injury.
SIGNAL WORD
Description of hazard
Consequence of ignoring the warning.
- Action to avoid the hazard.
DANGER
Electric shock
Death or serious personal injury.
- Switch off the power supply before
starting any work on the product.
Make sure that the power supply
cannot be accidentally switched on.
A blue or grey circle with a white
graphical symbol indicates that an
action must be taken to avoid a
hazard.
A red or grey circle with a diagonal
bar, possibly with a black graphical
symbol, indicates that an action must
not be taken or must be stopped.
If these instructions are not observed,
it may result in malfunction or damage
to the equipment.
Notes or instructions that make the
work easier and ensure safe
operation.