background image

2

English (US)

English (US) 

Installation and operating instructions

Original installation and operating 
instructions

These installation and operating instructions 
describe Grundfos ALPHA2.
Sections 1-5 give the information necessary to 
be able to unpack, install and start up the 
product in a safe way.
Sections 6-11 give important information about 
the product, as well as information on service, 
fault finding and disposal of the product.

CONTENTS

Page

1. Limited warranty

Products manufactured by Grundfos Pumps 
Corporation (Grundfos) are warranted to the 
original user only to be free of defects in 
material and workmanship for a period of 30 
months from date of installation, but not more 
than 36 months from date of manufacture.
Grundfos' liability under this warranty shall be 
limited to repairing or replacing at Grundfos’ 
option, without charge, F.O.B. Grundfos’ factory 
or authorized service station, any product of 
Grundfos manufacture. Grundfos will not be 
liable for any costs of removal, installation, 
transportation, or any other charges that may 
arise in connection with a warranty claim.
Products which are sold, but not manufactured 
by Grundfos, are subject to the warranty 
provided by the manufacturer of said products 
and not by Grundfos' warranty.
Grundfos will not be liable for damage or wear to 
products caused by abnormal operating 
conditions, accident, abuse, misuse, 
unauthorized alteration or repair, or if the 
product was not installed in accordance with 
Grundfos' printed installation and operating 
instructions and accepted codes of good 
practice. The warranty does not cover normal 
wear and tear.
To obtain service under this warranty, the 
defective product must be returned to the 
distributor or dealer of Grundfos' products from 
which it was purchased together with proof of 
purchase and installation date, failure date and 
supporting installation data. Unless otherwise 
provided, the distributor or dealer will contact 
Grundfos or an authorized service station for 
instructions. Any defective product to be 
returned to Grundfos or a service station must 

1.

Limited warranty

2

2.

General information

3

2.1

Symbols used in this document

3

3.

Receiving the product

4

3.1

Inspecting the product

4

3.2

Scope of delivery

4

4.

Installing the product

4

4.1

Quick installation tips

5

4.2

Mechanical installation

5

4.3

Changing the power head position

6

4.4

Insulating the pump housing

7

4.5

Electrical connection

8

5.

Starting up the product

10

5.1

Venting the pump

10

5.2

First startup

10

6.

Product introduction

10

6.1

Product description

10

6.2

Applications

10

6.3

Pumped liquids

11

7.

Identification

12

7.1

Nameplate

12

7.2

Type key

12

7.3

Approvals

12

8.

Control functions

13

8.1

Elements on the control panel

13

8.2

Display

13

8.3

Setting the pump

13

8.4

Selection of control mode by 

application

13

8.5

Pump control

14

8.6

Pump performance and operating 

mode selection

15

9.

Fault finding the product

16

10.

Technical data

18

10.1 Operating conditions

18

11.

Disposing of the product

19

Prior to installation, read this 
document. Installation and operation 
must comply with local regulations 
and accepted codes of good practice.

This appliance can be used by 
children aged from 8 years and above 
and persons with reduced physical, 
sensory or mental capabilities or lack 
of experience and knowledge if they 
have been given supervision or 
instruction concerning the use of the 
appliance in a safe way and 
understand the hazards involved. 
Children must not use or play with the 
appliance. Cleaning and user 
maintenance shall not be made by 
children without supervision.

Successful operation depends on 
careful attention to the procedures 
described in this manual. Keep this 
manual for future use.

Содержание ALPHA2 15-55F CI 115V























Отзывы: