Grunbeck pureliQ:K, Руководство по эксплуатации

Страница: 21 / 44

Start-up
21 | 44
B
A
_
T
D3
-A
K
0
0
0
en
_035
5.3 Setting pressure reducer (only pureliQ:KD)
The factory setting for the pressure reducer is 4 bar. You can
change this value as follows:
1. Open the withdrawal point.
2. Set the desired after-pressure on the handwheel for
pressure reducer by turning it.
3. Read off the measured actual after-pressure at the
pressure gauge on the front of the housing.
4. Close the withdrawal point.
+
-