Grunbeck pureliQ:A, Руководство по эксплуатации

Страница: 24 / 44

Start-up
24 | 44
B
A
_
T
D3
-A
A
0
0
0
e
n
_
0
2
5
5.2.2 Triggering a backwash manually
► Press the button for 3 seconds.
» A backwash is initiated.
If the electrical power supply is interrupted, the filter
automatically completes any backwash that may be in progress.
During the initial start-up or after a longer interruption of the
electrical power supply, the backwash protection will only be
available again after approx. 5 minutes.
5.3 Setting the month display
In order not to miss a check date, you can set the next date for
checking by turning the month display.
► Turn the ring above the month display until the desired
month is shown in the month display.