Grunbeck pureliQ:A, Руководство по эксплуатации, Страница: 25 / 44

Start-up
25 | 44
B
A
_
T
D3
-A
A
0
0
0
e
n
_
0
2
5
5.4 Setting pressure reducer (only pureliQ:AD)
The factory setting for the pressure reducer is 4 bar. You can
change this value as follows:
1. Open the withdrawal point.
2. Set the desired after-pressure on the handwheel for
pressure reducer by turning it.
3. Read off the measured actual after-pressure at the
pressure gauge on the front of the housing.
4. Close the withdrawal point.