7
07.2020 |
Safety instructions
Tree Runner Rigging Bollard 71-879, 71-877, 71-818
Intended use
The rigging bollard is used for dynamic catching and releasing of wood
loads (branches, crown parts, trunk pieces etc.) during pruning work. It
is attached to the tree trunk.
Improper use
Any improper use is prohibited. Improper use includes
• converting, modifying or disabling the rigging bollard,
• removing or modifying safety devices,
• any other use of the rigging bollard apart from those uses described
in the "Intended use" chapter,
• using the rigging bollard under operating conditions that deviate
from those specified in this manual.
Improper use of the rigging bollard voids all guarantee claims.
The manufacturer is not liable for damage to the rigging bollard or for
personal injuries that result from improper use.
Qualification of personnel
The rigging bollard may only be operated, maintained and repaired by
persons with appropriate training. It is essential to have been famil-
iarised with the device and the associated hazards by reading this
manual.
People who assemble, operate, disassemble or maintain the rigging
bollard must not be under the influence of alcohol, drugs or medi-
cation which could impair their reactions.
People under the age of 18 must not be employed on the rigging
bollard. However, it is permissible to allow persons over 16 years of
age to perform such work under the supervision of a qualified person
where this is required to achieve a training objective.
Persons operating the rigging bollard must also be physically capable of
supporting the weight of the tree part removed.
EN
