29
07.2020 |
Dealer service
Tree Runner Rigging Bollard 71-879, 71-877, 71-818
Accessories and spare parts
Unsuitable accessories, consumables and spare parts can impair
function and safety, and have the following consequences:
• Endangerment of persons
• Damage to the rigging bollard
• Damage to the rope and tension strap
›
Only use genuine accessories, consumables and spare parts.
›
Only use technically faultless accessories and spare parts.
For 71-879
Art. no.
Name
Quantity
71-879/P
Holding plate for rigging bollards
For extreme loads during felling, a holding
plate can be hooked in, which is sawn into the
tree.
• Dimensions: 120 mm wide, 140 mm deep,
• Incision depth: 90 mm
• Weight: 1.3 kg
1
71-879/G
Spare rubber plate
1
44-015
Lashing strap
• Tensile force: 2.5 t direct/5 t in strapping
• Preload force: 300 kg
• Material: Polyester
• Strap width: 50 mm
1
For 71-877
Art. no.
Name
Quantity
44-015
Lashing strap
• Tensile force: 2.5 t direct/5 t in strapping
• Preload force: 300 kg
• Material: Polyester
• Strap width: 50 mm
1
44-012/6.0
Tension strap with hook
Is stretched around the tree first. Then hang
the bollard in the hook.
A simple assembly aid.
• Length: 6 m
• Weight: 772 g
1
For 71-818
Art. no.
Name
Quantity
44-013/4.0
Tension strap
For attaching the bollard to the tree (two
pieces required). With long lever ratchet.
• Strap width: 50 mm
• Permissible load 50 kN (~ 5 t)
• Tear resistance: 100 kN (~ 10 t)
• Preload force: 500 daN with 50 kg manual
force
• Preload force: 750 daN with 75 kg manual
force
• Length: 4 m
1
44-013/6.0
Tension strap
For attaching the bollard to the tree (two
pieces required). With long lever ratchet.
• Strap width 50 mm
• Permissible load 50 kN (~ 5 t)
• Tear strength 100 kN (~ 10 t)
• 500 daN preload force at 50 kg manual force
• 750 daN preload force at 75 kg manual force
• Length: 6 m
1
EN
