25
07.2020 |
Decommissioning and disposal
Tree Runner Rigging Bollard 71-879, 71-877, 71-818
Decommissioning and disposal
If the rigging bollard is no longer usable and must be scrapped, decom-
mission and disassemble it.
›
During the scrapping process, note that the rigging bollard’s basic
materials can be reused in the recycling process.
The manufacturing company rejects all responsibility for any
personal injury or material damage that is caused by reusing
parts, where these are used for any purpose other than the
original material purpose.
When disposing of the rigging bollard or its components:
›
Observe the nationally applicable regulations and directives.
Storage
›
Only store the rigging bollard in enclosed rooms.
›
Ensure that the storage room is well ventilated and dry.
›
Clean the rigging bollard thoroughly before storing it for a longer
period of time (see chapter „Rigging-Poller reinigen“ auf Seite
24).
›
If light flash rust has formed in the area of the brake due to storage,
remove it with very fine greaseproof paper.
›
Then clean the bollard (see chapter „Rigging-Poller reinigen“ auf
Seite 24).
i
EN
