2
PB
INSTALLATION
1. Prepare the intake
hose by cutting a
sufficient length from
the rubber hose to
reach the bottom of
the drum or tank. Use
a clamp to keep the
cut square. Cut with
a Hose cutter or a
Hacksaw uniformly.
2. Insert one end of
the suction hose in
the intake nozzle on
pump body (1) and
fasten in place with
a hose clamp.
DESCRIPTION
EOP/DC/12
EOP/DC/24
EOP/AC/110
EOP/AC/230
Supply Voltage
12V DC
24V DC
110V AC
230V AC
Max. Flow Rate
Upto 9.25 GPM
(35 LPM)
Upto 9.25 GPM
(35 LPM)
Upto 10.5 GPM
(40 LPM)
Upto 10.5 GPM
(40 LPM)
Electric Motor
0.43 HP
Centrifugal Motor
0.43 HP
Centrifugal Motor
0.43 HP
Centrifugal Motor
0.43 HP
Centrifugal Motor
Amp Draw from the Battery
9.2 Amp
5.6 Amp
2.9 Amp
1 Amp
Aborbed Power
110 W
135 W
320 W
224 W
Insulation category
III
III
II
II
Discharge Head
1 meter
1 meter
1 meter
1 meter
Suction Pipe
3/4” ID x 1 m long
3/4” ID x 1 m long
3/4” ID x 1 m long
3/4” ID x 1 m long
Delivery Hose
3/4” ID x 3 m long
3/4” ID x 3 m long
3/4” ID x 3 m long
3/4” ID x 3 m long
Tank Adaptor
2”G & M64x4
2”G & M64x4
2”G & M64x4
2"G & M64x4
Inlet
3/4” Hose Barb
3/4” Hose Barb
3/4” Hose Barb
3/4” Hose Barb
Outlet
3/4” Hose Barb
3/4” Hose Barb
3/4” Hose Barb
3/4” Hose Barb
Dispensing Nozzle
Manual Polypropylene
Nozzle with 3/4” Hose
Barb
Manual Polypropylene
Nozzle with 3/4” Hose
Barb
Manual Polypropylene
Nozzle with 3/4” Hose
Barb
Manual Polypropylene
Nozzle with 3/4” Hose
Barb
Battery / Power cable
3 m long with Battery
Clamps
3 m long with Battery
Clamps
2 m long with Plug
3 m long with Plug
Water / Dust Protection
IPX4
(protection against
splashing water)
IPX4
(protection against
splashing water)
IPX4
(protection against
splashing water)
IPX4
(protection against
splashing water)
Noise Level
70 db
70 db
70 db
70 db
Working Temperature range
-10°C to +40°C
(14°F to 104°F)
-10°C to +40°C
(14°F to 104°F)
-10°C to +40°C
(14°F to 104°F)
-10°C to +40°C
(14°F to 104°F)
UL & cUL Listed
No
No
No
No
CE
Yes
Yes
Yes
Yes
Use with Petrol & other
Flammable Fuels
No
No
No
No
PUMP SPECIFICATION
