8
Revision date: 10.25.12
1
Assembly Instructions
Front
Back
ASSEMBLE THE BASE (continued)
7. Locate all remaining base frame brackets and
the screws (#FAF25P) and assemble the frame
as shown on the Frame Diagram pages of these
instructions.
REMEMBER:
Flip the frame as shown.
The
frame is assembled upside down and then flipped
over after it is completed. The extensions of the
corner brackets are driven into the ground to keep
the frame square during the remainder of the
assembly.
Longer frames include additional brackets to
secure the joints of the long boards. Consult
the Frame Diagrams for the locations of these
additional brackets if your frame includes two (2)
boards for each long frame member.
ATTENTION:
To avoid interfering with the back board and the brackets securing that
board, install the back brackets a few inches to the inside of the back board.
FAS14
104639
104636
FAS14
Back Board
Back Board
