8
INVERTER STATUS
Inverter is designed to be user-friendly; therefore, the status of the Inverter can be
easily understood by reading the information shown on the front panel display. All
possible messages are shown in the following table.
system fault
Inverter fault
DISPLAY
OPERATION
Auto Test Failed
No AC Connection
PV Isolation Low
Output High DCI
PV Voltage High
AC V Outrange
AC F Outrange
Auto Test do not pass
No Utility, No Grid Connect
Insulation Problem
Output Current DC Offset too high
PV panel Voltage too high
Grid Voltage out of range
Grid Frequency out of range
DISPLAY
OPERATION
Error: 100
Error: 101
Error: 102
Error: 116
Error: 117
Error: 118
2.5V Reference Voltage Fault
Communication Fault
Consistent Fault
EEPROM Fault
Relay Fault
Init Model Fault
Error: 120
HCT Fault
Error: 121
Error: 122
Auto Test Fail
Communication Fault
Error: 123
Bus Voltage Fault
22
23
COMMUNICATIONS
9
9.1 Communications software instructions
ShineNET is a PC software that communicate with Shine Inverter to analyze the
inverter working state. It is convenient for you to know the inverter real time working
state and the history work information.
Spec:
9.2 Monitor
After setting the software the user can monitoring the inverter. The right side of the
main interface is the detailed information of inverter.
9.3 Detailed information
Detailed setting method and other functions refer to “Shine NET Manual.” in the CD.
A
B
C
D
E
F
G
Communicate with inverter by RS232 and Bluetooth.
Construct net with inverter , GRO monitor and Shine NET by RS232,
Bluetooth and Internet.
Two Interfaces: Multi Inverter Interface and Wave Data Interface.
In Multi Inverter Interface: See at most 4 inverters working data at the
same time, you can select your own compare inverters and parameters.
In Wave Data Interface: Query the inverter real time and history power
wave , work data and error information.
Multi languages: English, French, German, Spanish and etc.
Support OS: Win XP / Vista/win 7/2000/2003.
