You can set all above by Growatt software 'Shinebus' with computer.
For further information please go to the site: www.ginverte.com.
Information
2014/01/01
12:00
2014/07/01
12:00
2014/07/06
13:00
Setting...
Setting. OK
The date and the time are set!
6.4.4 Power display
The power and energy of the inverter are displayed in three fields: Power, Day and
Total. The display is updated every five seconds.
Power
The power is that the inverter is currently feeding into the electricity
grid.
Day
The energy fed into the electricity grid on this particular day. This
equals the energy generated from the inverter's start-up in the
morning to the current time.
Total
The total energy is that the inverter has fed into the electricity grid
during its entire operating time.
Measurement accuracy
The display values may deviate from the actual values and must not be
used for billing purposes. The inverter's measurement values are
required for the operational control and to control the current to be
fed into the electricity grid. The inverter does not have a calibrated
meter.
49
50
Double knock the enclosure lid and the text will switch to the year”2012”, and
the two lower numbers “2012” will flash, you can change it by single knock.
2)
Double knock the enclosure lid and switching to the month”01”, and it will flash.
Then you can change it by single knock.
3)
So as to setting the day and the time.
4)
Then you need knock the enclosure three times to confirm it. And the text line
change as follow
：
5)
