1) Single knock until the text line switch to the text as follow:
Com Address: 001
2) Double knock the enclosure lid and the lower number text”1” will flash: 001.
Com Address: 002
3) If you want to change it, single knock to change it from 0 to 9.
If you want to set the address more lager, double knock the enclosure lid to let the
higher number text “002” flashing. And single knock the enclosure lid to change
it from 0 to 9. So as the highest number text. In the general condition, the
maximum number of the address is within 32.
Com Address: 012
5) Then you can knock the enclosure three times to confirm the address you have set.
Setting...
Setting. OK
The Com Address is set!
C) Switching the RS232 and the External wireless communication
As the Serial communication with the computer and the external
wireless communication using the same serial port, we have to choose
one. The RS232 is communicating to computer so that the computer can
be connected to the inverter using our software tools. The RS232 is
chose by default in the inverter.
Information
Trip the enclosure lid once every time until the text line switch to the text as follow:
RS232
Double knock the enclosure lid and switching to exter nal wireless
communication.follow:
Exter wireless
Then knock the enclosure three times to confirm it. And the text line change as
follow
：
Setting...
Setting. OK
The External wireless communication is set!
d)Setting date and time
2012/01/01
12:00
47
48
4)
1)
2)
3)
1) Single knock the enclosure lid until the text line switch to the text as follow
（
the
time maybe different depends on the inverter
）
:
