Grone 39 147, Руководство пользователя

Страница: 74 / 92

Components
39
Components
If the toilet has been used for a long period of time and fl ushing or cleansing functions seem to be getting weak,
clean the fi lters as described in the following procedure. Generally, the fi lters should be cleaned once every two
years.
Cleaning the Filter
1 Close the water shutoff valve.
2 Press the Flush/Full or the flush buttons on
the seat unit.
* Wait for about 20 seconds before performing the next
step.
3 Disconnect the power plug from the outlet.
4 Remove the side cover on the left side of
the seat unit.
5 Place a piece of cloth under the filter on
the left side of the seat unit and remove the
filter to drain the seat unit.
6 Thoroughly wash each component in water
to remove grime.
7 Fully reattach the filter as shown in the
diagram.
8 Attach the side cover.
9 Connect the power plug to the outlet.
10 Open the water shutoff valve fully.
• When using the toilet again
Be sure to perform usage checks before use.
[Note]
• Be careful not to damage the water supply hose when removing the fi lter.
CAUTION CAUTION
• Close the water shutoff valve when removing the fi lter.
• When installing the fi lter, tighten it fully so there is no gap.
• Check that the O-ring is free from foreign materials before attaching the fi lter, as failure to do so
could result in water leakage and fl ooding.
1
2
2
1
1
2
Low Water Pressure