Grone 39 147, Руководство пользователя

Страница: 47 / 92

12
Preparation and Check before Use
Checking the Rear Cleansing Feature [3]
• Cover the seat sensor with a piece of paper or cloth.
* If the paper or cloth is black, the occupied seat sensor may not function.
• Press the Cleansing button [A].
• Place a hand above the nozzle tip to
block the sprayed water.
* At this time, water comes out from a point near the nozzle tips in preparation for operation.
• Press the STOP button [B] to stop
the shower.
• Remove the paper or cloth covering the
seat sensor.
* Check the other functions by referring to “General Operation” .
* The toilet is equipped with a seat sensor, which detects when someone is sit-
ting on the seat.
The functions for front and rear cleansing, as well as for drying, cannot be
activated when there
is no one sitting on the seat.
WARNING WARNING
Ensure the electrical outlet to which the power cord is connected is properly grounded, as failure to do so may cause
electric shock or damage.
This product should only be connected to a 220 VAC, 50 Hz GFCI-protected outlet.
Do not connect additional power cords to the toilet’s electrical outlet, as this may result in fi re.
[A]
STEP
3
[B]
SENSIA