17
b.
Do not use the power tool if the switch does not turn it on and off . Any power tool that cannot
be controlled with the switch is dangerous and must be repaired.
c.
Disconnect the plug from the power source and/or the battery pack from the power tool be-
fore making any adjustments, changing accessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool accidentally.
d.
Store idle power tools out of the reach of children. Do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool. Power tools are dangerous in the
hands of untrained users.
e.
Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts
and any other condition that may aff ect the power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents are caused by poorly maintained power tools.
f.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control. Properly maintained tools are easier to control.
g.
Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking
into account the working conditions and the work to be performed. Use of the power tool for
operations diff erent from those intended could result in a hazardous situation.
5. Service
a.
Have your power tool serviced by a qualifi ed repair person using only identical original replace-
ment parts. This will ensure that the safety of the power tool is maintained.
Tile Saw-Specifi c Safety Warnings
Safety warnings common for cutting tile, paving stone, brick, etc.
Keep your hands away from the wheel working area.
There is a risk of pulling in and am-
putation of fi ngers or limbs.
Wear appropriate safety goggles
Wear dust mask
Always wear protective gloves
In the case of power cut, e.g. after a power failure, or unplugging the cord from the out-
let, the on/off button must be unblocked and set to the “off ” position.
This prevents the
power tool from starting accidentally.
Pay close attention to the workpiece.
Keep focused when using the machine
Keep your workplace clean.
Blends of materials are particularly dangerous. Dust from light
alloys can burn or explode.
Never use the machine with a damaged cord.
Do not touch the damaged cord and pull the
mains plug when the cable is damaged while working. Damaged cables increase the risk of an
electric shock.
Do not try to stop the blade by pushing the workpiece to the wheel side!
Do not cut several separate elements at once!
There is a risk of chipping the workpiece
element off under the wheel resulting in serious safety risk.
Do not move the machine standing on wheels unless it has knobs fi xed (1)
Pily_stolowe_GTTS_Full_v04_HR.indd 17
Pily_stolowe_GTTS_Full_v04_HR.indd 17
2016-10-19 03:21:02
2016-10-19 03:21:02
