Groen DEE/4 Series, Руководство оператора

Страница: 14 / 24

OM-DEE/4
14
Cleaning
1. Suggested Tools:
a.
b.
c.
d.
e.
A high quality detergent and sanitizer,
or a combination cleaning-sanitizing
agent.
Kettle brushes.
Groen Spray Degreaser (P/N 114801) or
equivalent.
Groen Delimer-Descaler (P/N 114800) or
equivalent.
A high quality stainless steel cleaner.
2. Precautions
Before cleaning, shut off the kettle by turning
the thermostat dial to “OFF,” and shut off all
electric power to the unit at a remote switch,
such as the circuit breaker.
WARNING
KEEP WATER AND SOLUTIONS AWAY
FROM CONTROLS AND ELECTRICAL
EQUIPMENT. NEVER SPRAY THE
SUPPORT HOUSING OR ELECTRICAL
CONNECTIONS.
CAUTION
MOST CLEANERS ARE HARMFUL TO THE
SKIN, EYES, MUCOUS MEMBRANES, AND
CLOTHING. PRECAUTIONS SHOULD BE
TAKEN. WEAR RUBBER GLOVES,
GOGGLES OR FACE SHIELD, AND
PROTECTIVE CLOTHING. READ THE
W A R N I N G S A N D F O L L O W T H E
DIRECTIONS ON THE LABEL OF THE
CLEANER CAREFULLY
3. Procedure
a. Clean food-contact surfaces as soon as
possible after use. If the unit is in
continuous use, thoroughly clean and
sanitize the interior and exterior at least
once every 12 hours.
b. Scrape and flush out food residues. Be
careful not to scratch the kettle with
metal implements.
c. Prepare a hot solution of the detergent/
cleaning compound as instructed by the
supplier. Clean the unit thoroughly. A
cloth moistened with cleaning solution
can be used to clean controls, housings,
and electrical conduits.
d.
e.
f.
Rinse the kettle thoroughly with hot
water, then drain completely.
Disassemble the tangent draw-off valve.
Clean the draw-off port and each valve
part with a bursh.
Rinse the kettle and draw-off valve parts
thoroughly with hot water, then drain
completely.
h. As part of the daily cleaning program,
clean soiled external and internal
surfaces. Remember to check the sides
of the unit and control housing.
i. To remove stuck materials, use a brush,
sponge, cloth, plastic or rubber scraper,
or plastic wool with the cleaning solution.
To reduce effort required in washing, let
the detergent solution sit in the kettle
and soak into the residue. Do NOT use
abrasive materials or metal tools that
might scratch the surface. Scratches
make the surface harder to clean and
provide places for bacteria to grow.
When attaching the draw-off valve, just
hand-tighten the nut.
g. When you reassemble the draw-off valve,
hand-tighten the nut which holds it in place.
Do NOT use steel wool, which may
leave particles in the surface and cause
eventual corrosion and pitting.
Scrapers or steel
wool can harm the
kettle surface
Use only a sponge,
cloth or plastic
brush to clean kettle.
14
OM-DEE/4