Grizzly T33150, Руководство пользователя

Страница: 17 / 40

Model T33150/T33151 (Mfd. Since 03/22)
-15-
SECTION 3: SETUP
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Wear safety glasses during
the entire setup process!
This machine was carefully packaged for safe
transport. When unpacking, separate all enclosed
items from packaging materials and inspect them
for shipping damage.
If items are damaged,
please call us immediately at (570) 546-9663.
IMPORTANT: Save all packaging materials until
you are completely satisfied with the machine and
have resolved any issues between Grizzly or the
shipping agent. You MUST have the original pack-
aging to file a freight claim. It is also extremely
helpful if you need to return your machine later.
Unpacking
Description Qty
•
Additional Person ....................................... 1
• Safety Glasses (for each person) ............... 1
• Phillips Head Screwdriver #2 ..................... 1
• Open-End Wrench 10mm ........................... 1
• Mounting Hardware .................... As Needed
• Ladder ........................................................ 1
Needed for Setup
The following items are needed, but not included,
for the setup/assembly of this machine.
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Figure 5. T33150 inventory.
A
B
C
D
E
F
Box 1 (Figure 5) Qty
A. Handle ........................................................ 1
B. Remote Control .......................................... 1
C. Eye Bolts
5
⁄
8
",
1
⁄
4
"-20 x
7
⁄
8
" ........................... 4
D. Flange Nuts
1
⁄
4
"-20 ...................................... 4
E. Rubber Feet M6-1 x 20 .............................. 4
F. Phillips Head Screws
1
⁄
4
"-20 x
5
⁄
8
" ............... 2
T33150 Inventory