-22-
Model T32957 (Mfd. Since 09/21)
SECTION 5: MAINTENANCE
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
For optimum performance from this machine, this
maintenance schedule must be strictly followed.
Ongoing
To minimize your risk of injury and maintain proper
machine operation, stop operations immediately if
you ever observe any of the items below, and fix
the problem before continuing operations:
•
Loose mounting bolts.
•
Loose or damaged blade guard.
•
Worn or damaged blades.
•
Loose or bent rear work stop support rods.
•
Any other unsafe condition.
Daily Maintenance
•
Clean and protect blades and bare cast iron
surfaces.
•
Lubricate pivot pins.
Schedule
Cleaning the Model T32957 is relatively easy. Use
a brush to clear away any metal debris from the
blades, the blade guard, and the table.
Keep the table and exposed portions of the blades
rust-free with regular applications of products like
G96
®
Gun Treatment, SLIPIT
®
, or Boeshield
®
T-9
(see
Page 20 for more details).
Cleaning &
Protecting
There are a number of parts on this machine that
undergo a lot of movement and must remain lubri-
cated for smooth operation and long life.
Lubrication
Oil Type .................T26685 or ISO 32 Equivalent
Oil Amount ....................................... 1 or 2 Drops
Lubrication Frequency ................................. Daily
Items Needed
Qty
Wire Brush ......................................................... 1
Shop Rags ......................................... As Needed
T26685 or ISO 32 Equivalent ............ As Needed
Pivot Pins
Figure 30. Location of pivot pins (2 of 4 shown).
Use a wire brush to clean any built-up grease
from pivot pins (see
Figure 30) before applying a
few drops of lubricant to the exposed portions of
all four pivot pins. Keep your hands and fingers
away from shearing area and press down on the
foot pedal a few times to distribute the lubricant.
Содержание T32957
Страница 36: ......
