Grizzly T32005, Руководство пользователя, Страница: 16 / 24

Model T32005 (Mfd. Since 04/20) -14
-
Changing Blade
4. Place new blade on arbor in correct
orientation (see Figure 7). If blade has
rotational arrow, align blade arrow with
arrow on saw.
3. Hold blade in place and remove arbor
screw with 2.5mm hex wrench (see
Figure 6).
Figure 6. Holding blade in place to
remove arbor screw.
Arbor
Screw
The blade is secured to the arbor with an
arbor screw and flange.
Tools Needed Qty
Hex Wrench 2.5mm .................................. 1
To change blade:
1. DISCONNECT TOOL FROM POWER!
2. Pull blade guard straight up to remove
it (see Figure 5).
Figure 5. Removing blade guard.
Blade
Guard
CAUTION: Saw blades are sharp and
can cut even while tool is
OFF. Wear
gloves to protect your hands while han-
dling and installing the blade.
Figure 7. Blade on arbor with arbor screw
and flange.
5. Hold blade in place and tighten arbor
screw with 2.5mm hex wrench.
6. Attach blade guard by pushing down
until it snaps in place.
Arbor
Flange
Arbor
Screw