Grizzly T32005, Руководство пользователя, Страница: 14 / 24

Model T32005 (Mfd. Since 04/20) -12
-
DO NOT start tool until all preced-
ing setup instructions have been
performed. Operating an improperly
set up tool may result in malfunc-
tion or unexpected results that can
lead to serious injury, death, or tool/
property damage.
Serious injury or death can result
from using tool BEFORE under-
standing its controls and related
safety information. DO NOT oper-
ate, or allow others to operate, tool
until information is understood.
Test Run
Once assembly is complete, test run the
tool to ensure it is properly connected to
power and safety components are working
properly.
If you find an unusual problem during the
test run, immediately stop the tool, discon-
nect it from power, and fix the problem
BEFORE operating the tool again. The
Troubleshooting table in the SERVICE
section of this manual can help.
The test run consists of verifying the fol-
lowing: 1) The motor powers up and runs
correctly.
To test run tool:
1. Clear away all setup/adjustment tools.
2. Verify blade is properly installed (see
Changing Blade on Page 14).
3. Connect tool to power supply.
4. While firmly holding handle, press
and hold ON/OFF lever. Motor should
run smoothly and without unusual
problems or noises.
5. Release ON/OFF lever. Motor should
immediately stop running.