Model T32002 (Mfd. Since 02/20)
-13-
Additional Safety for Rotary Attachments
AVOIDING ENTANGLEMENT. Becoming entan-
gled in moving parts can cause severe injury or
death. DO NOT wear loose clothing, gloves, or
jewelry; and tie back long hair.
EXPLOSION HAZARDS. Sparks while using
grinding bit can easily ignite flammable gasses,
fluids, or materials. ALWAYS make sure these
substances are completely removed from work
area before operation.
TOOL CAPACITIES. ALWAYS operate this attach-
ment with bits and tools rated for the capacities
stated on data sheet.
STARTUP INJURIES. Grinding wheel, buffing
wheel, and rotary attachment all power up and
spin at the same time. ALWAYS remove rotary
attachment when not in use to avoid accidental
injury.
WORKPIECE CONTROL. If spinning tool slips
from workpiece during operation, piercing or abra-
sion injury could occur. Secure workpiece in vise
or clamp before starting rotary tool. Jamming tool
against workpiece could cause workpiece or tool
to shatter and send debris in all directions. Firmly
grasp rotary tool and ease it into workpiece.
Entanglement injuries can occur from being caught in moving parts. Rotating attachments can
easily remove skin. Flying sparks from grinding can ignite explosive or flammable materials. To
minimize risk injury, completely heed warnings below.
No list of safety guidelines can be complete.
Every shop environment is different. Always
consider safety first, as it applies to your
individual working conditions. Use this and
other machinery with caution and respect.
Failure to do so could result in serious per-
sonal injury, damage to equipment, or poor
work results.
Like all machinery there is potential danger
when operating this machine. Accidents are
frequently caused by lack of familiarity or
failure to pay attention. Use this machine
with respect and caution to decrease the
risk of operator injury. If normal safety pre-
cautions are overlooked or ignored, serious
personal injury may occur.
Содержание T32002
Страница 36: ......
