Grizzly T23092 Скачать руководство пользователя страница 5

Model T23092 (Mfd. Since 04/11)

-3

-

SECTION 2: INTRODUCTION

Type of Feed ............................................................................................................... Siphon
Viscosity Range .............................................................................................Medium to High
Waterborne Material Compatible ........................................................................................No
Nozzle Size .................................................................................................................... 2mm
Maximum Pattern Width .................................................................................................. 9 in.
Air Inlet Size .............................................................................................................1/4" NPT
Fluid Cup Capacity ....................................................................................................... 1 Liter
Average Air Consumption ................................................................................... 6 - 8.8 CFM
Operating Air Pressure ......................................................................................... 44 - 58 PSI
Cup Construction .................................................................................................... Aluminum
Gun Body Construction .................................................................................... Painted Metal

Specifications

We are proud to offer this manual with your 
new  spray  gun!  We've  made  every  effort 
to be exact with the instructions, specifica-
tions, drawings, and photographs we used 
when writing this manual. However, some-
times we still make an occasional mistake.

Also,  owing  to  our  policy  of  continuous 
improvement,  your  spray  gun  may  not 
exactly match the manual. If you find this 
to be the case, and the difference between 
the  manual  and  spray  gun  leaves  you  in 
doubt,  check  our  website  for  the  latest 
manual  update  or  call  technical  support 
for help.

For  your  convenience,  we  post  all  avail-
able manuals and manual updates for free 
on  our  website  at  www.grizzly.com.  Any 
updates to your model of machine will be 
reflected  in  these  documents  as  soon  as 
they are complete.

Foreword

Contact Info

We  stand  behind  our  tools.  If  you  have 
any  service  questions,  parts  requests  or 
general  questions  about  the  tool,  please 
call or write us at the location listed below.

Grizzly Technical Support

1815 W. Battlefield

Springfield, MO 65807

Phone: (570) 546-9663

E-Mail: [email protected]

We  want  your  feedback  on  this  manual. 
If  you  can  take  the  time,  please  email  or 
write  to  us  at  the  address  below  and  tell 
us how we did:

Grizzly Industrial, Inc.

C/O Technical Documentation Manager

P.O. Box 2069

Bellingham, WA  98227-2069

Email: [email protected]

Содержание T23092





















Отзывы: