background image

Model T23092 (Mfd. Since 04/11)

-1

-

SECTION 1: SAFETY

For Your Own Safety Read Instruction Manual 

Before Operating This Equipment

The purpose of safety symbols is to attract your attention to possible hazard-
ous conditions. This manual uses a series of symbols and signal words which 
are intended to convey the level of importance of the safety messages. The 
progression of symbols is described below. Remember that safety messages by 
themselves do not eliminate danger and are not a substitute for proper accident 
prevention measures.

Indicates an imminent hazardous situation which, if 
not avoided, WILL result in death or serious injury.

Indicates a potentially hazardous situation which, if 
not avoided, COULD result in death or serious injury.

Indicates a potentially hazardous situation which, if 
not avoided, MAY result in minor or moderate injury. 
It may also be used to alert against unsafe practices.

This symbol is used to alert the user to useful infor-
mation about proper operation of the equipment.

NOTICE

Safety Instructions for Spray Guns

OWNER’S MANUAL. This gun may cause 

personal  injury  if  used  incorrectly.  This 

manual contains proper safety and operat-

ing  instructions  that  must  be  followed  to 

reduce this risk.

EYE PROTECTION. Material sprayed into 

eyes  may  cause  serious  injury  or  blind-

ness.  Always  wear  safety  goggles  ANSI 

approved  for  spraying  (sealing  type)  to 

reduce your risk from this hazard.

HAZARDOUS  PARTICLES.  Airborne 

particles  and  fumes  are  toxic  and  can 

cause  brain  damage  or  death.  To  reduce 

your risk, only use the spray gun in a well 

ventilated  area  with  adequate  supply  of 

fresh air.

WEARING  A  RESPIRATOR.  Airborne 

material  from  spraying  can  be  very  haz-

ardous  to  lungs.  Always  wear  a  NIOSH- 

approved respirator for spraying and fumes 

of your material type; or use a supplied air 

respirator  system  that  delivers  fresh  air 

from an outside location via hoses.

HEARING PROTECTION.  Pressurized 

spray guns or hoses may burst unexpect-

edly  if  damaged  or  poorly  maintained, 

causing serious injury. Fix air leaks imme-

diately and follow all recommended main-

tenance. Never operate this spray gun with 

loose or disassembled components. Never 

modify the spray gun.

Содержание T23092





















Отзывы: