Grizzly T10814, Руководство пользователя

Страница: 30 / 44

-28-
Model T10814 (Mfd. Since 5/15)
SECTION 6: MAINTENANCE
Cleaning and
Protecting
Lubrication
For optimum performance from your tool grinder,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Daily Check
•
Worn or damaged grinding wheel.
• Worn or damaged wires.
• Any other unsafe condition.
Daily Maintenance
•
Add oil to ball oilers (
Page 29).
• Lubricate carriage slides ( Page 29).
Monthly Check
•
Belt tension, damage, or wear.
• Clean/vacuum dust buildup on housing and
index bracket.
• Grinding wheel for loading up.
Schedule
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
The tool grinder has metal-to-metal sliding sur-
faces that require regular lubrication to maintain
smooth movement and ensure long-lasting opera-
tion.
Other than the lubrication points covered in this
section, all other bearings are internally lubricated
and sealed at the factory. Simply leave them
alone unless they need to be replaced.
Before performing any lubrication task,
DISCONNECT TOOL GRINDER FROM POWER!
Items Needed Qty
Clean Rag ........................................ As Needed
Mineral Spirits .................................... As Needed
Stiff Brush .......................................................... 1
Pump-Type Oil Can w/Plastic Cone Tip ............ 1
Metal dust left on the machine will invite oxida-
tion and residue build-up around the moving
parts. Use a brush and shop vacuum to remove
dust and debris from the working surfaces of the
machine. Never blow off the machine with com-
pressed air, as this will force metal dust deep into
the mechanisms and may cause injury to yourself
or bystanders.
Remove any rust buildup from unpainted cast iron
surfaces of your machine and treat with a non-
staining lubricant after cleaning.
Keep unpainted cast iron surfaces rust-free with
regular applications of the same ISO 32 oil used
for the ball oilers.