Grizzly G4179, Руководство пользователя

Страница: 18 / 40

-16-
Model G4179 (Mfd. Since 01/22)
Power Connection
Before the machine can be connected to the
power source, an electrical circuit and connec-
tion device must be prepared per the
POWER
SUPPLY section in this manual, and all previ-
ous setup instructions in this manual must be
complete to ensure that the machine has been
assembled and installed properly.
Always make sure the power switch on the
machine is turned OFF (or the OFF button is
pushed in) before connecting power.
Electrocution, fire, shock,
or equipment damage
may occur if machine is
not properly grounded
and connected to power
supply.
Connecting Plug to Power Cord
To connect plug to power cord, install 6-15 plug
on end of power cord per plug manufacturer's
instructions. If no instructions were included, use
wiring diagram on
Page 33.
Note About Extension Cords: Using an incor-
rectly-sized extension cord may decrease the life
of electrical components on your machine. If you
must use an extension cord, refer to
Extension
Cords on Page 11 for more information.