Grizzly G4179, Руководство пользователя

Страница: 17 / 40

Model G4179 (Mfd. Since 01/22)
-15-
Assembly
You MUST assemble all guards, fences, and
hold-downs before starting your machine or
power feeder. Failure to heed this warning
could result in serious personal injury.
Figure 7. Stand assembly.
B
A
C
Figure 8. Assembled unit.
The machine must be fully assembled before it
can be operated. Before beginning the assembly
process, refer to
Needed for Setup and gather
all listed items. To ensure the assembly process
goes smoothly, first clean any parts that are cov-
ered or coated in heavy-duty rust preventative (if
applicable).
Tip: We recommend using a set of C-clamps to
temporarily secure the base while assembling the
power feeder to prevent it from tipping. You will
mount the power feeder to the machine table after
completing the assembly process. Refer to
Base
Mounting on Page 17 for specific details.
To correctly position this power feeder on your
table top, completely assemble the power feeder
first in the order of
A, B and C as shown in
Figures 7–8. Next, refer to Base Mounting on
Page 17. With the power feeder unit completely
assembled, it will be easier to locate where on the
table top you will need to drill your base mounting
holes, so you can take advantage of the full range
of power feeder swing and adjustments.