Grizzly G4002 Скачать руководство пользователя | Manualshive

Страница: 33 / 64

background image

Model G4002/G4003 (Mfg. Since 8/12)

-31-

figure 29. detail of tailstock controls.

Tailstock controls

the tailstock serves many functions. the primary
use is for holding centers and drill chucks. the
barrel has a Morse taper #3 bore and is imprinted
with graduations in millimeters and inches. please
refer to

figure 29.

Tailstock Handwheel  -  turning  the  handwheel
advances  or  retracts  the  barrel  in  the  tailstock.
the  graduated  dial  on  the  handwheel  is  adjust-
able.

Top Lock Lever - this lever locks the tailstock
barrel in place.

Side Lock Lever - this lever locks the tailstock in
place on the lathe bed.

Test Run

Now that the lathe is securely in place and you’ve
read the safety guidelines, it’s time to give the
machine a test run.

before starting the machine:

1. Make sure the machine is properly grounded,

the power switch is in the “oFF” position and
the spindle control lever is in the neutral posi-
tion. see

figure 30.

2. inspect the machine to ensure that all hand

tools are out of the way, guards are in place
and nothing is impeding the movement of the
chuck. Check this by rotating the chuck by
hand.

3. rotate the stop switch, on the headstock of

the lathe, in the direction indicated by the
arrows imprinted on the button.

4. lower the control lever on the apron. the

spindle should start turning in a counter
clockwise direction.

if the direction is reversed, contact our service
department for further instructions.

5. if the lathe is running correctly, lift the spindle

control lever to the neutral position, wait for
the machine to come to a complete stop and
take some time to become familiar with the
various controls.

Always make sure the power switch is in the

“off” position and the spindle control lever

is in the neutral position before plugging in

power cord.

figure 30. Carriage control lever in neutral.

«
...
31
32
33
34
35
...
»

Содержание G4002

































































Отзывы:

Нет отзывов

Похожие инструкции для G4002

Бренд: Laguna Tools Страницы: 24

Бренд: laguna Страницы: 54

Бренд: Jet Страницы: 9

Бренд: Jet Страницы: 56

SHOP FOX W1752 s

Бренд: Woodstock Страницы: 2

Бренд: MetalMaster Страницы: 24

Бренд: King Canada Страницы: 5

Бренд: OVERBECK MACHINE Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды