manualshive.com logo in svg

Grizzly G4002, Руководство пользователя

Поделиться
Скачать
Grizzly G4002 Скачать руководство пользователя страница 5

Model G4002/G4003 (Mfg. Since 8/12)

-3-

The information contained herein is deemed accurate as of 6/4/2013 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 1 OF 3

Model G4002

MACHINE DATA

SHEET

Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901

MODEL G4002 12" X 24" GEAR-HEAD, CAM LOCK SPINDLE,

GAP BED LATHE

Product Dimensions:

Weight.............................................................................................................................................................. 913 lbs.

Width (side-to-side) x Depth (front-to-back) x Height........................................................................... 53 x 26 x 23 in.

Footprint (Length x Width)............................................................................................................................ 53 x 23 in.

Shipping Dimensions:

Type.......................................................................................................................................................... Wood Crate

Content........................................................................................................................................................... Machine

Weight............................................................................................................................................................ 1004 lbs.

Length x Width x Height....................................................................................................................... 59 x 30 x 28 in.

Must Ship Upright................................................................................................................................................... Yes

Electrical:

Power Requirement........................................................................................................... 220V, Single-Phase, 60 Hz

Prewired Voltage.................................................................................................................................................. 220V

Full-Load Current Rating........................................................................................................................................ 12A

Minimum Circuit Size.............................................................................................................................................. 15A

Connection Type....................................................................................................................................... Cord & Plug

Power Cord Included............................................................................................................................................... No

Recommended Power Cord............................................................................... “S”-Type, 3-Wire, 14 AWG, 300 VAC

Plug Included........................................................................................................................................................... No

Recommended Plug Type..................................................................................................................................... 6-15

Switch Type............................................................................................ Control Panel w/Magnetic Switch Protection

Motors:

Main

Type................................................................................................................. TEFC Capacitor-Start Induction

Horsepower................................................................................................................................................ 2 HP

Phase............................................................................................................................................ Single-Phase

Amps............................................................................................................................................................ 12A

Speed................................................................................................................................................ 1725 RPM

Power Transfer .................................................................................................................................. Belt Drive

Bearings..................................................................................................... Shielded & Permanently Lubricated

Main Specifications:

Operation Info

Swing Over Bed......................................................................................................................................... 12 in.

Distance Between Centers........................................................................................................................ 24 in.

Swing Over Cross Slide............................................................................................................................... 7 in.

Swing Over Saddle...................................................................................................................................... 7 in.

Swing Over Gap........................................................................................................................................ 17 in.

Maximum Tool Bit Size............................................................................................................................. 5/8 in.

Compound Travel.................................................................................................................................. 3-1/4 in.

Carriage Travel.................................................................................................................................... 18-1/2 in.

Cross Slide Travel................................................................................................................................. 6-1/4 in.

Содержание G4002

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды