Grizzly G4002 Скачать руководство пользователя | Manualshive

Страница: 32 / 64

background image

-30-

Model G4002/G4003 (Mfg. Since 8/12)

figure 27. spindle rotation control lever.

spindle  rotation  control  -  the  spindle  rotation  is
controlled  from  the  lever  on  the  right  hand  side
of  the  carriage.  Moving  the  lever  down  causes
the  spindle  to  rotate  counter  clockwise.  Moving
the lever up causes the spindle to turn clockwise.
the middle position stops the motor and the lever
is  considered  to  be  in  a  neutral  position.  see

figure 27.

cross Slide Handwheel -  the  Cross  slide
handwheel moves the top slide toward and away
from the work. turning the dial clockwise moves
the  slide  toward  the  workpiece.  the  graduated
dial  can  be  adjusted  by  holding  the  handwheel
with one hand and turning the dial with the other.

carriage Handwheel - the longitudinal
handwheel moves the carriage left or right along
the bed. the control is helpful when setting up the
machine for turning or when manual movement is
desired during turning operations.

Tool post & Holder

figure 28. Quick change tool post.

Tool post - A quick change tool post and 2 tool
holders are supplied with the Model g4002/3.

figure  28  shows  tool  post  and  a  holder  with
optional  bit.  Cutting  tools  can  be  secured  and
removed by tightening or loosening the clamping
screws in the top of the holder. A threaded stud is
mounted in the top of the holder and has a knurled
thumb wheel. rotating the thumb wheel allows for
adjustment  of  the  tool  holder  so  the  cutting  tool
can be centered. the handle on the tool post can
be rotated to lock and unlock the tool holder onto
the dovetail ways. the tool post may be rotated by
loosening the nut at the top of the tool post.

More styles of tool holders are available through
grizzly industrial, inc. Consult the latest catalog
for styles, prices and ordering information.

«
...
30
31
32
33
34
...
»

Содержание G4002

































































Отзывы:

Нет отзывов

Похожие инструкции для G4002

Бренд: Jet Страницы: 68

Бренд: Trak Machine Tools Страницы: 7

Бренд: Sealey Страницы: 4

Бренд: South bend Страницы: 4

Бренд: South bend Страницы: 4

Бренд: South bend Страницы: 4

Бренд: South bend Страницы: 4

Бренд: South bend Страницы: 4

Бренд: South bend Страницы: 4

Бренд: South bend Страницы: 16

Бренд: South bend Страницы: 76

Бренд: South bend Страницы: 136

Бренд: South bend Страницы: 132

Бренд: South bend Страницы: 136

Бренд: South bend Страницы: 136

Бренд: South bend Страницы: 140

Бренд: South bend Страницы: 144

Бренд: South bend Страницы: 148

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды