Grizzly G1037Z, Инструкция по эксплуатации

Страница: 22 / 52

-20- G1037Z 13" Planer/Moulder
Your safety is important! Please follow the
warnings below during this entire section:
Damage to your eyes, lungs, and ears
could result from failure to wear safety
glasses, a respirator, and hearing protec-
tion while using this machine.
Loose hair and clothing
could get caught in
machinery and cause
serious personal injury.
Keep loose clothing
rolled up and long hair
tied up and away from
machinery.
No list of safety guidelines can be complete.
Every shop environment is different. Always
consider safety first, as it applies to your
individual working conditions. Use this and
other machinery with caution and respect.
Failure to do so could result in serious per-
sonal injury, damage to equipment, or poor
work results.
• Surface one face on a jointer if your stock is
twisted or cupped.
• Scrape all glue off when planing glued-up
panels.
• DO NOT plane more than one piece at a
time.
• DO NOT remove more than 1 ⁄
8
'' (3.2mm) of
material on each pass. Remove less materi-
al on each pass when planing wide or dense
stock.
• Use the 12 FPM feed speed for a smoother
finish.
• Remove less material on each pass for a
smoother finish.
• Support the workpiece on both ends. Get
assistance if you are planing long lumber, or
use roller stands to support the workpiece.
• Measure the workpiece thickness with
calipers to get exact results.
• Carefully inspect all stock to make sure it is
free of large knots or foreign objects that may
damage your blades.
• When possible, plane equal amounts on
each side of the board to reduce the chance
of twisting or cupping.
• Use the entire width of the planer to wear
knives evenly.
• Always plane WITH the grain direction of the
wood. Never plain cross-grain or end-grain.
• Always feed multiple pieces of stock end to
end to reduce snipe.
Planing Tips General
SECTION 6: OPERATIONS