Model G0939/G0940 (Mfd. Since 12/20)
-51-
BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
Labels & Cosmetics
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual,
call (800) 523-4777 or
go to www.grizzly.com.
WARNING!
Up Down
G0940
201
202
203
204
205
206
207
208
INJURY HAZARD!
To reduce risk of short-
and long-term injury,
wear safety glasses,
hearing protection, and
a respirator when using
this machine.
209
210
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
211
212
213
G0939
1/8"
1/4"
3.175mm
1/8"
3.175mm
6.35mm
1/4"
6.35mm
1/2"
12.7mm
1/2"
12.7mm
3/4"
19.05mm
3/4"
19.05mm
1"
25.4mm
1"
25.4mm
31.75mm
1 "
1
/
4
31.75mm
1 "
1
/
4
1. Raise the cutterhead assembly above the
workpiece.
2. Rotate the dial to the preferred depth.
3. Lower the cutterhead assembly until it gently
rests on the depth stop, then proceed with cut.
The depth stop dial allows the operator to pre-set
the desired finished workpiece thickness. This is
indicated by the white dot on the depth stop dial
pointing to the thickness scale.
To adjust depth stop dial:
CUTTERHEAD DEPTH STOP DIAL
INJURY HAZARD!
To reduce the risk of serious personal
injury, do not remove this cover while the
machine is running or connected to power.
Always disconnect power before servicing.
Specifications
MODEL G0939
13" 2 HP BENCHTOP PLANER
Mfd. for Grizzly in China
Max. Stock Thickness: 6"
Max. Cutting Width: 13"
Min. Stock Thickness: 1/8"
Min. Stock Length: 6"
Feed Rate: 25 FPM
Weight: 67 lbs.
S/N
Date
Motor: 2 HP, 120V, 60 Hz, 15A
Cutterhead: 2" Dia., 3-Knife
Knife Size: 13" x 12mm x 1/16"
Max. Cut Depth Full Width: 1/32"
Max. Cut Depth 6" Width: 3/32"
Cutterhead Speed: 8500 RPM
Specifications
MODEL G0940
13" 2 HP BENCHTOP PLANER
w/HELICAL CUTTERHEAD
Mfd. for Grizzly in China
Max. Stock Thickness: 6"
Max. Cutting Width: 13"
Min. Stock Thickness: 1/8"
Min. Stock Length: 6"
Feed Rate: 25 FPM
Weight: 78 lbs.
S/N
Date
Motor: 2 HP, 120V, 60 Hz, 15A
Cutterhead: 2 Spirals, 30 Inserts
Insert Size: 15 x 15 x 2.5mm
Max. Cut Depth Full Width: 1/32"
Max. Cut Depth 6" Width: 3/32"
Cutterhead Speed: 8500 RPM
To reduce the risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved safety glasses, respirator, and hearing protection.
3. Disconnect power before doing any service or maintenance on machine.
4. Only plug power cord into a grounded outlet.
5. Do not wear loose clothing, gloves, jewelry, or other items that can get
entangled. Tie back long hair and roll up sleeves.
6. Do not plane two boards of varying thickness at the same time.
7. Never plane material smaller than 6" long, 3/4" wide, or 1/8" thick.
8. Keep fingers clear of pinch point between stock and table.
9. Stand clear of board ends during cutting operation.
10. Inserts/knives are sharp! Use extreme caution when servicing.
11. Never reach into cutting area while machine is running.
12. Do not expose to rain or use in wet locations.
13. Prevent unauthorized use by children or untrained users.
WARNING!
REF PART #
DESCRIPTION
REF PART #
DESCRIPTION
201
P0939201
GRIZZLY LOGO LABEL
208
P0939208
READ MANUAL LABEL
202
P0939202
ELEVATION LABEL
209
P0939209
EYE, EARS, LUNGS LABEL
203
P0939203
MACHINE ID LABEL (G0939)
210
P0939210
MODEL NUMBER LABEL (G0939)
203
P0940203
MACHINE ID LABEL (G0940)
210
P0940210
MODEL NUMBER LABEL (G0940)
204
P0939204
MACHINE WARNINGS LABEL
211
P0939211
DISCONNECT POWER LABEL
205
P0940205
DEPTH STOP DIAL LABEL (G0940)
212
P0939212
TOUCH-UP PAINT, GRIZZLY GREEN
206
P0939206
ELECTRICITY LABEL
213
P0939213
TOUCH-UP PAINT, GRIZZLY BLACK
207
P0939207
INJURY HAZARD LABEL
