Grizzly G0939 Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 56

background image

Model G0939/G0940 (Mfd. Since 12/20)

-43-

Wiring Safety Instructions

SHOCK HAZARD. Working on wiring that is con-
nected to a power source is extremely dangerous.
Touching  electrified  parts  will  result  in  personal
injury  including  but  not  limited  to  severe  burns,
electrocution,  or  death.  Disconnect  the  power
from the machine before servicing electrical com-
ponents!

MODIFICATIONS. Modifying the wiring beyond
what is shown in the diagram may lead to unpre-
dictable results, including serious injury or fire.
This includes the installation of unapproved after-
market parts.

WIRE CONNECTIONS.  All  connections  must
be  tight  to  prevent  wires  from  loosening  during
machine  operation.  Double-check  all  wires  dis-
connected or connected during any wiring task to
ensure tight connections.

CIRCUIT REQUIREMENTS. You MUST follow
the requirements at the beginning of this manual
when connecting your machine to a power source.

WIRE/COMPONENT DAMAGE. Damaged wires
or components increase the risk of serious per-
sonal injury, fire, or machine damage. If you notice
that any wires or components are damaged while
performing a wiring task, replace those wires or
components.

MOTOR WIRING. The motor wiring shown in
these diagrams is current at the time of printing
but may not match your machine. If you find this
to be the case, use the wiring diagram inside the
motor junction box.

CAPACITORS/INVERTERS. Some capacitors
and power inverters store an electrical charge for
up to 10 minutes after being disconnected from
the power source. To reduce the risk of being
shocked, wait at least this long before working on
capacitors.

EXPERIENCING DIFFICULTIES. If you are expe-
riencing difficulties understanding the information
included in this section, contact our Technical
Support at (570) 546-9663.

The photos and diagrams
included in this section are
best viewed in color. You
can view these pages in
color at www.grizzly.com.

These pages are current at the time of printing. However, in the spirit of improvement, we may make chang-
es to the electrical systems of future machines. Compare the manufacture date of your machine to the one
stated in this manual, and study this section carefully.

If there are differences between your machine and what is shown in this section, call Technical Support at
(570) 546-9663 for assistance BEFORE making any changes to the wiring on your machine. An updated
wiring diagram may be available.

Note: Please gather the serial number and manufacture date of your

machine before calling. This information can be found on the main machine label.

SECTION 8: WIRING

machine

«
...
43
44
45
46
47
...
»

Содержание G0939

























































Отзывы:

Нет отзывов

Похожие инструкции для G0939

Бренд: Technics Страницы: 18

Бренд: Akai Страницы: 5

Бренд: Goldmund Страницы: 11

Бренд: Nova Страницы: 33

Бренд: Hafco Woodmaster Страницы: 24

Бренд: Toyota Страницы: 36

Бренд: NAD Страницы: 33

Бренд: Delta Страницы: 49

Бренд: Hamilton/Buhl Страницы: 14

Бренд: Bang & Olufsen Страницы: 28

Бренд: Magnavox Страницы: 24

Бренд: Teac Страницы: 18

Бренд: Harman Kardon Страницы: 20

CDP 9100 SPCD Mystixx

Бренд: Grundig Страницы: 16

Бренд: JVC Страницы: 23

Бренд: JVC Страницы: 8

Бренд: JVC Страницы: 2

Бренд: JVC Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды