Grizzly G0895, Руководство пользователя

Страница: 8 / 60

-6-
Model G0895 (Mfd. Since 01/20)
X+ or 1: Moves spindle along X-axis in positive
direction. Scrolls menu up. Input for "1".
Y+ or 2: Moves gantry along Y-axis in positive
direction. Increases feed rate during process.
Scrolls sub-menu up. Input for "2".
Z+ or 3: Moves spindle along Z-axis in positive
direction. Increases spindle speed during pro-
cess. Input for "3".
XY->0 or 4: Sets work origin of X- and Y-axes
(see
Page 37). Input for "4".
X- or 5: Moves spindle along X-axis in negative
direction. Scrolls menu down. Input for "5".
Y- or 6: Moves gantry along Y-axis in negative
direction. Decreases feed rate during process.
Scrolls sub-menu down. Input for "6".
Z- or 7: Moves spindle along Z-axis in negative
direction. Decreases spindle speed during pro-
cess. Input for "7".
Z->0 or 8: Sets work origin of Z-axis (see Page
37). Input for "8".
HOME or 9: Returns all axes to home position
(see
Page 36). Input for "9".
HIGH/LOW or 0: In manual mode, selects high or
low speed for axis movement. Input for "0".
ON/OFF or (.): Turns spindle ON or OFF. Input
for decimal point.
MENU or (-): Enters setup menus. Input for the
negative symbol.
ORIGIN or OK: Returns all axes to work origin
(see
Page 37). Confirms motions, inputs, or
operations.
MODE: Toggles between three jogging modes:
Continuous, Step, or Distance.
RUN/PAUSE or DELETE: Runs or pauses pro-
cessing. Used to load a program from either the
USB drive or internal memory.
STOP or CANCEL: Stops a running program.
Cancels commands.
The following commands are used for the basic
navigation of the machine and controller. Additional
functions can be accessed with multi-button com-
mands. See
Using Advanced Controls on Page
40 for more information.
Figure
9. Controller buttons.
Controller Functions