-16-
Model G0879 (Mfd. Since 6/19)
Assembly
The machine must be fully assembled before it
can be operated. Before beginning the assembly
process, refer to
Needed for Setup on Page 14
and gather all listed items.
To assemble machine:
1. Install handle using (2) Phillips head screws
with pre-installed lock washers and flat wash-
ers (see
Figure 10).
2. Slide latch back to lift top cover and expose
wire spool spindle and feed mechanism (see
Figure 10).
Figure 11. Wire spool installed.
Wire
Spool
Spool
Nut
Compression
Spring
Spool
Collar
3. Install wire roll on spool spindle so spool will
feed counterclockwise.
4. Secure wire spool using spool collar, com-
pression spring, and spool nut (see
Figure 11).
Wire spool should have some resistance but
rotate freely.
Figure 10. Handle installed.
Top
Cover
Latch
x 2
5. Assemble face shield by folding edges and
snapping together. Install face shield handle
by snapping it to front of face shield.
Содержание G0879
Страница 36: ......