Grizzly G0849 Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 56

background image

Model G0849 (Mfd. Since 01/19)

-51-

BUY PARTS ONLINE AT GRIZZLY.COM!

Scan QR code to visit our Parts Store.

Labels & Cosmetics

G0849

WARNING!

EYE/LUNG INJURY

HAZARD!

Always wear safety

glasses and a

respirator when

using this machine.

HEARING LOSS

HAZARD!

Always wear hearing

protection when

using this machine!

To reduce risk of death

or serious injury, read

manual BEFORE using

machine.
To get a new manual,

call (800) 523-4777 or

go to www.grizzly.com.

WARNING!

DISCONNECT
POWER BEFORE
ADJUSTMENTS,
MAINTENANCE, OR
SERVICE.

ON

/

OFF

FILTER

BRUSH

CLEANING

DUST

COLLECTION

INDICATOR

OFF

ON

POWER

FILTER BRUSH

CLEANING

INDICATOR

POWER

INDICATOR

grizzly.com

201

202

202

202

203

204

205

206

207

208

209

210

211

212

213

S/N

Mfd. for Grizzly in Taiwan

Motor: 3 HP, 230V, 1-Ph, 60 Hz
Full-Load Current Rating: 18.5A
Suction Capacity: 1616 CFM @ 2.0" SP
Max. Static Pressure: 14.2"
Inlet Size: 8"
Cartridge Filter: 19" x 42-1/2"
Filtration: 99.9% at 0.2 – 2 Micron
Replacement Filter: T28919
Replacement Filter Bag: T28924
Replacement Drum Bag: T30326
Weight: 452 lbs.

Date

To reduce the risk of serious injury when using this machine:

  1. Read and understand owner’s manual before operating.
  2. Always wear approved eye protection, hearing protection, and respirator.
  3. Only plug power cord into a grounded outlet.
  4. Only use this machine to collect wood dust/chips—never use to collect glass, metal, liquids,

asbestos, silica, animal parts, biohazards, burning material/ashes, etc.

  5. Always disconnect power before servicing or cleaning.
  6. Do not expose to rain or use in wet areas.
  7. Keep hands, long hair, and loose clothing away from inlet.
  8. Never leave machine unattended during operation.
  9. Do not use if cord, plug, or any other electrical equipment becomes damaged—promptly
   repair!
10. Do not use without dust bag, canister, or filters in place.
11. Do not connect cord to power supply with wet hands.
12. Grasp and pull the plug, not the cord, when unplugging.
13. Always wear a respirator when emptying bags or canisters.
14. Do not modify machine in any way.
15. Prevent unauthorized use by children or untrained users; disable machine when unattended.

MODEL G0849

3 HP CYCLONE DUST COLLECTOR

WARNING!

Specifications

REF PART #

DESCRIPTION

REF PART #

DESCRIPTION

201

P0849201

MACHINE ID LABEL

208

P0849208

GLASSES/RESPIRATOR LABEL

202

P0849202

ELECTRICITY LABEL, SMALL

209

P0849209

UNPLUG 220V WARNING LABEL

203

P0849203

CONTROL PANEL LABEL

210

P0849210

READ MANUAL WARNING LABEL

204

P0849204

REMOTE CONTROL LABEL

211

P0849211

ELECTRICITY LABEL, LARGE

205

P0849205

TOUCH-UP PAINT, GRIZZLY GREEN

212

P0849212

MODEL NUMBER LABEL

206

P0849206

TOUCH-UP PAINT, GRIZZLY PUTTY

213

P0849213

GRIZZLY.COM LABEL

207

P0849207

HEARING WARNING LABEL

Safety labels help reduce the

risk of serious injury caused

by machine hazards. If any

label comes off or becomes

unreadable, the owner of this

machine MUST replace it in

the original location before

resuming operations. For

replacements, contact (800)

523-4777 or www.grizzly.com.

«
...
51
52
53
54
55
...
»

Содержание G0849

























































Отзывы:

Нет отзывов

Похожие инструкции для G0849

Бренд: Husqvarna Страницы: 9

Бренд: Nederman Страницы: 28

Бренд: Nederman Страницы: 30

Бренд: Jet Страницы: 12

Бренд: DeWalt Страницы: 2

Бренд: National Flooring Equipment Страницы: 21

Бренд: Helpmation Страницы: 26

Бренд: Helpmation Страницы: 26

Бренд: Helpmation Страницы: 26

Бренд: Bucktool Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды