Grizzly G0849, Руководство пользователя

Страница: 18 / 56

-16-
Model G0849 (Mfd. Since 01/19)
Assembly
The machine must be fully assembled before it
can be operated. Before beginning the assembly
process, refer to
Needed for Setup and gather
all listed items. To ensure the assembly process
goes smoothly, first clean any parts that are cov-
ered or coated in heavy-duty rust preventative (if
applicable).
To assemble machine:
1. Install (3) 3" non-locking swivel casters to
base stand using (12)
1
⁄
4
"-20 x
3
⁄
4
" hex bolts
and (12)
1
⁄
4
" flat washers (see
Figure 9).
5. Attach (2) rear legs (36" long) to base stand
with (2)
5
⁄
16
"-18 x
3
⁄
4
" hex bolts and (2)
5
⁄
16
"
fender washers per leg (see Figure 12).
Finger-tighten for now.
3. Position lower front legs in base stand with
flanges facing inside and two threaded bolt
holes above, as shown in
Figure 11.
4. Secure left and right lower front legs to base
stand using (2)
5
⁄
16
"-18 x
3
⁄
4
" hex bolts and (2)
5
⁄
16
" fender washers per leg (see
Figure 11).
Finger-tighten for now.
2. Install (2) 3" locking swivel casters to base
stand using (8)
1
⁄
4
"-20 x
3
⁄
4
" hex bolts and (8)
1
⁄
4
" flat washers (see Figure 10), then place
base stand on casters.
Figure 9. Non-locking swivel casters installed.
x 12
Figure 10. Locking swivel casters installed.
Figure 12. Rear legs attached to base stand.
x 4
Rear
Legs
Figure 11. Lower front legs installed.
Right
Leg
x 4
Left
Leg
Flanges
Face
Inside
Front
Bolt
Holes
Above
Flange
x 8