Grizzly G0811, Руководство пользователя

Страница: 25 / 68

Model G0811 (Mfd. Since 02/16)
-23-
SECTION 4: OPERATIONS
Operation Overview
The purpose of this overview is to provide the nov-
ice machine operator with a basic understanding
of how the machine is used during operation, so
the machine controls/components discussed later
in this manual are easier to understand.
Due to the generic nature of this overview, it is
not intended to be an instructional guide. To learn
more about specific operations, read this entire
manual and seek additional training from expe-
rienced machine operators, and do additional
research outside of this manual by reading "how-
to" books, trade magazines, or websites.
To complete a typical cutting operation, the
operator does the following:
1. Examines workpiece to make sure it is suit-
able for cutting.
2. Raises headstock, then rotates feed rate dial
all the way clockwise to secure headstock
position.
3. Adjusts vise angle, then securely clamps
workpiece in vise.
4. Adjusts left blade guide arm as close to
workpiece as possible, and verifies blade is
properly tensioned.
5. Makes sure workpiece and machine are
stable and that there are no obstructions in
the way of cut.
6. Puts on safety glasses and respirator.
7. Starts machine and waits for blade to reach
full speed, then turns on coolant pump and
valves.
8. Turns feed rate dial counterclockwise to lower
headstock and blade into workpiece, then
allows machine to complete cut.
9. Once machine has stopped, raises head-
stock, and removes workpiece.
10. When finished, turns machine OFF.
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
To reduce risk of eye injury from flying
chips or lung damage from breathing dust,
always wear safety glasses and a respirator
when operating this machine.
If you are not experienced with this type
of machine, WE STRONGLY RECOMMEND
that you seek additional training outside of
this manual. Read books/magazines or get
formal training before beginning any proj-
ects. Regardless of the content in this sec-
tion, Grizzly Industrial will not be held liable
for accidents caused by lack of training.