manualshive.com logo in svg

Grizzly G0811, Руководство пользователя, Страница: 8 / 68

Поделиться
Скачать
Grizzly G0811 Скачать руководство пользователя страница 8

-6-

Model G0811 (Mfd. Since 02/16)

The information contained herein is deemed accurate as of 2/13/2017 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 2 OF 2

Model G0811

Cutting Capacities

Cutting Height.............................................................................................................................................. 9 in.

Angle Cuts.............................................................................................................................................. 45 deg.

Vise Jaw Depth.......................................................................................................................................... 16 in.

Vise Jaw Height..................................................................................................................................... 5-1/8 in.

Max. Capacity Rectangular Height at 90 Deg.............................................................................................. 5 in.

Max. Capacity Rectangular Width at 90 Deg............................................................................................. 16 in.

Max. Capacity Round at 90 Deg.................................................................................................................. 9 in.

Max. Capacity Rectangular Height at 30 Deg.............................................................................................. 9 in.

Max. Capacity Rectangular Width at 30 Deg............................................................................................. 14 in.

Max. Capacity Round at 30 Deg.................................................................................................................. 9 in.

Max. Capacity Rectangular Height at 45 Deg.............................................................................................. 8 in.

Max. Capacity Rectangular Width at 45 Deg......................................................................................... 9-1/2 in.

Max. Capacity Round at 45 Deg.................................................................................................................. 9 in.

Construction

Table....................................................................................................................... Precision-Ground Cast Iron

Trunnions............................................................................................................................................. Cast Iron

Upper Wheel........................................................................................................................................ Cast Iron

Lower Wheel........................................................................................................................................ Cast Iron

Body........................................................................................................................................................... Steel

Stand.......................................................................................................................................................... Steel

Wheel Cover............................................................................................................................................... Steel

Paint Type/Finish...................................................................................................................................... Epoxy

Other

Wheel Size.......................................................................................................................................... 11-3/4 in.

Blade Guides Upper..................................................................................................................... Carbide Steel

Blade Guides Lower..................................................................................................................... Carbide Steel

Table Info

Table Size Length...................................................................................................................................... 31 in.

Table Size Width................................................................................................................................... 6-1/2 in.

Table Size Thickness............................................................................................................................ 4-1/2 in.

Floor To Cutting Area Height............................................................................................................... 26-1/8 in.

Other Specifications:

Country of Origin .............................................................................................................................................. Taiwan

Warranty ........................................................................................................................................................... 1 Year

Approximate Assembly & Setup Time .............................................................................................................. 1 Hour

Serial Number Location .................................................................................................................................. ID Label

ISO 9001 Factory .................................................................................................................................................. Yes

Certified by a Nationally Recognized Testing Laboratory (NRTL) .......................................................................... No

Features:

Coolant System with 10-Liter Coolant Capacity

Heavy-Duty, Precision-Ground Cast-Iron Table

Blade Speeds from 114 – 377 FPM

Large 31" x 6-1/2" Table

Quick-Positioning Vise

Hydraulic Feed Control

Top-Mounted Control Panel

Sliding Cutter Depth Gauge

Handwheel Blade Tensioner

Содержание G0811





































































Отзывы:

Нет отзывов