Grizzly G0787 Скачать руководство пользователя страница 27

Страница: 27 / 40

Model G0787 (Mfd. Since 09/14)

-25-

SECTION 6: MAINTENANCE

For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.

Daily Check
•

Loose mounting bolts.

•

Worn/damaged sanding disc or sanding belt.

•

Worn or damaged wires.

•

Any other unsafe condition.

As Needed
•

Clean/replace sanding disc or sanding belt.

Monthly Check
•

Drive belt tension, damage, or wear.

Schedule

To reduce risk of shock or

accidental startup, always

disconnect machine from

power before adjustments,

maintenance, or service.

Cleaning the Model G0787 is relatively easy.
Vacuum excess wood chips and sawdust, and
wipe off the remaining dust with a dry cloth. If any
resin has built up, use a resin dissolving cleaner
to remove it.

Cleaning &

Protecting

Cleaning Sanding

Belt/Disc

Using an abrasive belt/disc cleaner can prolong
the life of a clogged sanding belt/disc, provided it
is in otherwise good condition. See

Accessories

Page 23 for more details.

To clean sanding belt/disc:

1. Turn machine ON.

2. Using backstop or work table as support,

rub abrasive cleaner on sanding belt/disc in
continuous motion, covering entire surface of
belt/disc until belt/disc is no longer clogged.

3. Turn machine OFF.

Содержание G0787









































Результаты поиска

Содержание G0787

Отзывы:

Похожие инструкции для G0787

Бренды по названию

Популярные бренды

Grizzly G0787, Руководство пользователя

Результаты поиска

Содержание G0787

Отзывы:

Похожие инструкции для G0787

Бренды по названию

Популярные бренды