Grizzly G0787, Руководство пользователя

Страница: 17 / 40

Model G0787 (Mfd. Since 09/14)
-15-
Test Run
Once assembly is complete, test run the machine
to ensure it is properly connected to power and
safety components are functioning properly.
If you find an unusual problem during the test run,
immediately stop the machine, disconnect it from
power, and fix the problem BEFORE operating the
machine again. The
Troubleshooting table in the
SERVICE section of this manual can help.
DO NOT start machine until all preceding
setup instructions have been performed.
Operating an improperly set up machine
may result in malfunction or unexpect-
ed results that can lead to serious injury,
death, or machine/property damage.
Serious injury or death can result from
using this machine BEFORE understanding
its controls and related safety information.
DO NOT operate, or allow others to operate,
machine until the information is understood.
To test run machine:
1. Clear all setup tools away from machine.
2. Connect machine to power supply.
3. Turn machine ON, verify motor operation,
and then turn machine OFF.
Motor should run smoothly and without
unusual problems or noises.
4. Remove key from toggle switch, as shown
below.
Figure 13. Removing key from toggle switch.
5. Try to start machine with switch. The machine
should not start.
— If the machine does not start, the toggle
switch is working correctly. Congratulations!
The Test Run is complete.
— If the machine does start (with the toggle
switch removed), immediately disconnect
power to the machine. The toggle switch
safety feature is not working correctly. This
safety feature must work properly before
proceeding with regular operations. Call
Tech Support for help.