Model G0787 (Mfd. Since 09/14)
-11-
SECTION 3: SETUP
Your machine was carefully packaged for safe
transportation. Remove the packaging materials
from around your machine and inspect it. If you
discover any damage, please call us immediately
at (570) 546-9663 for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi-
tion of your shipment, inventory the contents.
Unpacking
SUFFOCATION HAZARD!
Keep children and pets away
from plastic bags or packing
materials shipped with this
machine. Discard immediately.
The following are needed to complete the setup
process, but are not included with your machine.
Description Qty
•
Safety Glasses ....................................1 Pair
•
Screwdriver Phillips #2 ............................... 1
•
Hex Wrench 6mm ....................................... 1
•
Screwdriver Flat Head #2 ........................... 1
•
Dust Collection System .............................. 1
•
Dust Hose 2
1
⁄
2
" ........................................... 1
•
Hose Clamps 2
1
⁄
2
" ...................................... 2
Needed for Setup
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Box 1 (Figure 4)
Qty
A. Backstop ..................................................... 1
B. Disc Cover .................................................. 1
C. Miter Gauge ................................................ 1
D. Sanding Disc .............................................. 1
E. Work Table ................................................. 1
F. Hardware (Not Shown):
—Fender Washer 6mm .............................. 1
—Cap Screws M8-1.25 x 16....................... 2
—Flat Washers 8mm ................................. 2
—Tap Screws M4 x 10 ............................... 2
—External Tooth Washers 4mm ................ 2
A
B
C
D
E
Figure 4. Model G0787 inventory.
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Содержание G0787
Страница 40: ......