Grizzly G0767, Руководство пользователя

Страница: 19 / 48

Model G0767 (Mfd. Since 1/14)
-17-
— Rotate lifting bar up (see
Figure 11),
and attach lifting chain and safety hook
between lifting bar and lifting device.
10. With two other people holding onto machine
to steady and balance the load, lift machine
onto base and position it so vise and roll-
er storage cabinet both face the front of
machine.
11. Secure machine to base with six cap screws
removed in
Step 7 (see Figure 12).
Figure 12. Machine attached to base.
Cap Screws
12. Re-install column front cover removed in
Step 6.
13. Re-install electrical box in column.
14. Remove pre-installed fasteners shown in
Figure 13. These fasteners will secure feed
lever assembly in next step.
Figure 13. Locations of feed lever fasteners.
T-Bolt
w/Flat Washer
Lock Nut
w/Flat Washer
15. Attach feed lever assembly to machine
with fasteners removed in
Step 14 (see
Figure 14).
Figure 14. Feed lever assembly attached.
Feed Lever
Assembly
Figure 11. Example photo of lifting machine with
chain and hook.
Lifting
Bar