Grizzly G0761 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 56

Grizzly G0761 Скачать руководство пользователя страница 4

-2-

Model G0761 (Mfd. Since 10/13)

INTRODUCTION

Machine Description

We are proud to provide a high-quality owner’s
manual with your new machine!

We made every effort to be exact with the instruc-
tions, specifications, drawings, and photographs
contained inside. sometimes we make mistakes,
but our policy of continuous improvement also
means that

sometimes the machine you receive

will be slightly different than what is shown in

the manual.

if you find this to be the case, and the difference
between  the  manual  and  machine  leaves  you
confused  about  a  procedure,  check  our  website
for an updated version. We post current manuals
and  manual  updates  for  free  on  our  website  at

www.grizzly.com.

Alternatively, you can call our technical support
for help. Before calling, please write down the

Manufacture Date and Serial Number stamped
into the machine id label (see below). this infor-
mation helps us determine if updated documenta-
tion is available for your machine.

Manufacture date

serial number

Manual Accuracy

We  stand  behind  our  machines.  If  you  have
any  questions  or  need  help,  use  the  information
below to contact us. Before contacting, please get
the  serial  number  and  manufacture  date  of  your
machine. This will help us help you faster.

Grizzly Technical Support

1203 Lycoming Mall Circle

Muncy, PA 17756

Phone: (570) 546-9663

Email: [email protected]

We want your feedback on this manual. What did
you like about it? Where could it be improved?
Please take a few minutes to give us feedback.

Grizzly Documentation Manager

P.O. Box 2069

Bellingham, WA 98227-2069

Email: [email protected]

Contact Info

the mill/drill is used to shape metal workpieces
by removing material with the use of a rotating
cutting tool.

in milling operations, the cutting tool rotates in
place while the workpiece is drawn across it by
moving the table.

in drilling operations, the workpiece is held sta-
tionary on the table while the rotating cutting tool
moves up-and-down with the movement of the
spindle.

in tapping operations, the tap is lowered into the
workpiece and threads itself down until the depth
stop is reached. At this point, spindle direction
automatically reverses and the tap rotates back-
wards out of the hole.

«
...
2
3
4
5
6
...
»

Содержание G0761

























































Отзывы:

Нет отзывов