Grizzly G0761, Руководство пользователя, Страница: 35 / 56

Model G0761 (Mfd. Since 10/13)
-33-
Quill Outside Surface
lube type ...Model t23962 or iso 68 equivalent
lube Amount ........................................thin Coat
lubrication Frequency ........... 8 hrs. of operation
Without disturbing the grease on the quill rack,
clean the outside smooth surface of the quill (see
Figure 41) with mineral spirits and shop rags.
Figure 41. outside surface of quill.
Quill outside
surface
When dry, apply a thin coat of lubricant to the
smooth surface, then move the spindle up and
down to evenly distribute the oil.
Table Leadscrews
lube type ...Model t23962 or iso 68 equivalent
lube Amount ........................................thin Coat
lubrication Frequency ......... 40 hrs. of operation
Move the table as necessary to access the entire
length of the X- and y-axis leadscrews (see
Figures 42–43), then use mineral spirits, shop
rags, and a brush to clean them.
use a 4mm hex wrench to remove the way cover
from the base to access the y-axis leadscrew.
When dry, use a clean brush to apply a thin coat
of oil to the leadscrew threads, then move the
table through the X- and y-axis paths to distribute
the oil.
Figure 42. X-axis leadscrew.
X-Axis leadscrew
Figure 43. y-axis leadscrew.
y-Axis leadscrew