Grizzly G0734, Руководство пользователя

Страница: 15 / 40

Model G0734/G0735 (Mfd. Since 12/15)
-13-
Figure 4. Box 1 inventory items.
Figure 5. Additional inventory items for G0735.
A
B
C
J
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Box 1: (Figure 4) Qty
A. Blade Guard ............................................... 1
B. Blade Adapters .......................................... 2
C. Pin-End Blade 18 TPI ................................. 1
D. Hex Wrench 3mm ....................................... 1
E. Hex Wrench 2.5mm .................................... 1
F. Pin-End Blade 15 TPI (Not Shown) ............ 1
G0735 Flex-Shaft Rotary Tool (Figure 5)
G. Drill Bit
1
⁄
8
" .................................................. 1
H. Collet Chuck Wrench .................................. 1
I. L-Wrench .................................................... 1
J. Flex-Shaft Rotary Tool ................................ 1
D
E
G
H
I